1JZ/2JZ Serpentine Tensioner Pulley/Belt No AC or PS. If you want to eliminate both the AC pump and PS pump, you need to run a new ribbed pulley on your original tensioner arm, and a shorter belt. Some people have called this the "S2000 pulley mod", but ours is a 6 rib pulley with the correct offset. The tensioner arm is not included and you must remove the original smooth pulley and replace it with this new ribbed one. A simple modification is required to the ribs on the aluminum arm behind the pulley to allow extra clearance, this can be done simply with a hand file, a dremel tool, or a grinder.
We don't recommend this setup with an underdrive (smaller than stock) crank pulley because it may not have enough belt engagement around the pulley, which can cause the belt to slip.
If you have an ATI overdrive (larger than stock) crank pulley, a longer belt is required, please select that option
Tilaustuote
Korisi on tyhjä.
