Radium - Split-Flow Flex Fuel Sensor Adapter

Tuotenro: 20-0589

Varastossa 2 kpl

159,00


Flex fuel sensors measure ethanol content. They can be used in the FPR return line. But for improved accuracy and faster response times, the sensor should be plumbed upstream of the fuel injectors in the feed line. In this case, expect to see up to a ~10psi pressure drop if multiple pumps are used with a high-powered engine.
As shown above, the Radium Engineering adapter splits the fuel flow into an auxiliary passage parallel to the sensor. Because the flex fuel sensor is directly inline with the fuel flow path, it will read the incoming ethanol content at high and low engine demands. Traditionally this additional flow path could be accomplished with hose and y-adapter fittings. However, the Radium Split-Flow Flex Fuel Sensor Adapter is less complicated, considerably compact, and provides a mounting solution for the popular GM 13577429 flex fuel sensor (shown below).
FEATURES
-4pc billet 6061 aluminum construction
-Black anodized and laser engraved
-10AN (5/8") equivalent flow rate
-Can be used on fuel feed or return line
-8 double FKM O-rings (primary and backup)
-Stainless steel metric hardware

Asiakkaat, jotka ostivat tämän tuotteen, ostivat myös

Alumiiniputket 50cm
alkaen 12,00
Alumiinikäyrät 90° Jyrkkä
alkaen 29,00
Alumiinikäyrät 90° Loiva
alkaen 21,00
Nuke Performance - Fuel Filter Slim 10 / 100 micron
alkaen 150,00

Selaa tätä tuoteryhmää: Polttoaineensyöttö