AEM’s Methanol/Water Injection Filter can filter particulates as small as 40 microns. It protects the working parts of the water/methanol system and the engine from particulates in the water/methanol mixture when installed in-line before the water/methanol pump, and can be used on virtually any water/methanol injection system using ¼” OD tubing.

• Boost Dependent HD controller features large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button for enhanced splash resistance and mounting tabs
• Wiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, integrated pump ground circuit and additional wire for optional on/off solenoid
• Heavy-duty high-pressure injection pump features integral fittings, a Santoprene diaphragm and EPDM seals to resist corrosion; pump's quiet, smooth operation is almost undetectable
• Two precision-machined billet-aluminum injectors with integral check valves include multiple nozzles to cover a wide range of horsepower levels (500cc/min and two 1,000cc/min)
• 5 gallon tank with anti-slosh technology and high tech conductive low-fluid sensor with positive lock connector 20 feet of Nylon injection tubing included LED dash light for system status and low fluid warning

Fuelab 1.5 Inch EFI Fuel Pressure Gauge Dual BAR/PSI Scale. Range: 0-120 PSI

Accessory Features:

• Black Casing
• 1.5 Inch Diameter White Face, with Black Text
• 1/8-NPT Direct Mount
• For reference use on Regulators or Fuel Rails with Gauge Ports
• Not for use in Passenger or Driver’s Compartments

• Description
• Reviews
• Also in Universal Fuel Pulse Dampers

Click here to download installation instructions (PDF)

• Description
• Reviews
• Also in Universal Fuel Pulse Dampers

Click here to download installation instructions (PDF)

In some cases, mounting a fuel pressure gauge or pressure transducer directly to the fuel rail is not possible due to confined space around the fuel rail, or the fuel gauge would not be easily visible. In these cases it is ideal to remote mount the pressure gauge or transducer.
This kit contains all the necessary parts to remote mount a gauge or transducer for testing fuel pressure. The kit works with any fuel rail or pressure regulator that has a 1/8NPT female port.
The kit also contains a Schrader valve that can be used for pressure testing, bleeding air out of the line, fuel sampling, or relieving fuel pressure before service. 

This kit can be used as single-use tool, or it can be left on the vehicle as a permanent component.

The Kit Contains:
1x 16" High Pressure PTFE 3AN Hose
1x 1/8NPT to 3AN Male Adapter, 90 degree
1x 1/8NPT to 3AN Male Adapter, Straight
1x 1/8NPT 3-way Tee Fitting, Female
1x 1/8NPT Schrader valve with cap
**Always use PTFE tape or paste on NPT threads**

GAUGE NOT INCLUDED.
A compatible Radium fuel pressure gauge can be found here.

Injector Nozzle Kit, 250cc/min, 500cc/min., 1,000cc/min, Kit

• 

 

 

click on thumbnail to zoom

 

 

 

Our Price:	$49.95
Selection	20-0534 Universal Check Valve - ($49.95) 20-0534-06 Universal Check Valve Kit, 6AN - ($59.95) 20-0534-08 Universal Check Valve Kit, 8AN - ($59.95) 20-0534-10 Universal Check Valve Kit, 10AN - ($59.95)
Quantity:

 

• Description

A 1-way check valve permits flow in 1 direction only. The Radium Engineering universal check valve features a lightweight anodized aluminum body with FKM seals and stainless steel hardware. As shown below, the internal plunger's aerodynamic shape warrants a smooth laminar stream.

As seen above, all female -AN ports can accept 37 degree flare male fittings and/or ORB (O-ring boss) male fittings. As depicted below, the flow direction is laser etched on the side of the part.

The check valve is compatible in multiple applications including gasoline, ethanol, methanol, diesel, water, coolant, oil, etc.

SPECIFICATIONS
Body Seal: FKM
Plunger Seal: FKM
Hardware: Stainless Steel
Spring Material: Stainless Steel
Plunger Material: Stainless Steel
Body Material: Anodized Aluminum
Check Valve Type: Spring-Loaded Piston
Large Hex: 30mm (or 1-3/16")
Length, No Adapters: 1.72" (43.6mm)
Cracking Pressure: 0.3 psi @ 70F
Max Operating Pressure: 1000+psi @ 70F
Backflow Holding Pressure: 1000+psi @ 70F

All tests performed by Radium Engineering in Clackamas, Oregon.

20-0534 UNIVERSAL CHECK VALVE
In it's native form without adapter fittings, the universal check valve uses a 10AN male outlet and a 8AN female inlet.

The 20-0534-XX kits below will cover most scenarios. Alternatively, custom adapter fittings for this check valve can be purchased HERE. 

20-0534-06 UNIVERSAL CHECK VALVE KIT, 6AN
The 6AN kit includes the 20-0534 check valve body but adds all the necessary adapter fittings to convert both the inlet and the outlet to 6AN male and/or 6AN female.

Shown below are all of the adapter fitting scenarios for this check valve kit.

20-0534-08 UNIVERSAL CHECK VALVE KIT, 8AN
The 8AN kit includes the 20-0534 check valve body but adds all the necessary adapter fittings to convert both the inlet and the outlet to 8AN male and/or 8AN female.

Shown below are all of the adapter fitting scenarios for this check valve kit.

20-0534-10 UNIVERSAL CHECK VALVE KIT, 10AN
The 10AN kit includes the 20-0534 check valve body but adds all the necessary adapter fittings to convert both the inlet and the outlet to 10AN male and/or 10AN female. 

Shown below are all of the adapter fitting scenarios for this check valve kit.

• 
• 
• 
• 
• 
• 
• 
• 

 

 

click on thumbnail to zoom

 

 

 

Our Price:	$34.95
Application	14-0165 FPR Adapter, 3/8NPT, 11mm Bore, 32mm Spacing, M5 - ($34.95) 14-0285 FPR Adapter, 8AN ORB to M12x1.25 Female - ($14.95) 20-0014 FPR Adapter, Housing, Fittings, Hardware - ($69.95) 20-0301 FPR Adapter, 8AN ORB, 11mm Bore, 39mm Spacing, M6 - ($34.95) 20-0302 FPR Adapter, 8AN ORB, 16mm Bore, 39mm Spacing, M6 - ($34.95) 20-0303 FPR Adapter, 8AN ORB, 11mm Bore, 32mm Spacing, M5 - ($34.95) 20-0459 FPD Adapter, 8AN ORB, 27mm Bore - ($29.95) 20-0460 FPD Adapter, 8AN ORB, 11mm Bore, 42mm Spacing, M6 - ($34.95) 20-0595 FPR Adapter, 8AN ORB, 7mm Bore, 39mm Offset, M6 - ($34.95) 20-0603 FPR Adapter, 8AN ORB, 7mm Bore, 39mm Spacing, M6 - ($34.95)
Quantity:

 

• Description
• Also in Parts for HONDA / ACURA

These anodized billet 6061 aluminum adapter fittings allow an OEM fuel pressure regulator (FPR) or fuel pulse damper (FPD) to be reused in an application other than the OEM fuel rail. All fittings permit the unit to be clocked into the proper position.

Part Number: 20-0301
Fitting Threads: 8AN ORB male
FPR Threads: M6x1.0mm
Application: 
Mazda MX-5 B6
Mazda MX-5 BP
Mitsubishi EVOX 4B11T
Toyota 1GR-FE
Toyota 2JZ-GE
Toyota 2JZ-GTE
Toyota 2RZ-FE
Toyota 3RZ-FE
Saab 9-2X Aero 2.0L
Subaru EJ20 GDA WRX
Subaru EZ30 Phase-I
Suzuki G16B
etc. 
Required: Fuel rail must have a 8AN ORB female threaded port.

Part Number: 20-0302
Fitting Threads: 8AN ORB male
FPR Threads: M6x1.0mm
Application: 
Mitsubishi EVO IV
Mitsubishi EVO V
Mitsubishi EVO VI
Mitsubishi EVO VII
Mitsubishi EVO VIII
Mitsubishi EVO IX
etc.
Required: Fuel rail must have a 8AN ORB female threaded port.

Part Number: 20-0303 
Fitting Threads: 8AN ORB male
FPR Threads: M5x0.8mm
Application: 
Nissan RB26DETT
Nissan RB25DET
Nissan RB20DET
Nissan SR20DET
Nissan KA24DE
Nissan CA18DET
Saab 9-2X Aero 2.5L
Subaru EJ20 GC8 WRX
Subaru EJ25 GR WRX
Mazda RX-7 13B-REW
etc.
Required: Fuel rail must have a 8AN ORB female threaded port.

Part Number: 20-0460
Fitting Threads: 8AN ORB male
FPR/FPD Threads: M6x1.0mm
Application: 
Nissan VQ35DE Fuel Pulse Damper
Nissan VR38DETT Fuel Pulse Damper
Nissan VR38DETT Fuel Pressure Regulator
etc. 
Required: Fuel rail must have a 8AN ORB female threaded port.

Part Number: 20-0595
Fitting Threads: 8AN ORB male
FPR Threads: M6x1.0mm
Application: 
Honda D16Y7 Fuel Pressure Regulator
Honda D16Y8 Fuel Pressure Regulator
Honda B20 Fuel Pressure Regulator
Honda F20A4 Fuel Pressure Regulator
Honda F20B Fuel Pressure Regulator
Honda F20C Fuel Pressure Regulator
Honda F23A Fuel Pressure Regulator
etc. 
Required: Fuel rail must have a 8AN ORB female threaded port.

Part Number: 20-0603
Fitting Threads: 8AN ORB male
FPR Threads: M6x1.0mm
Application: 
Honda D16Z6 Fuel Pressure Regulator
Honda B16 Fuel Pressure Regulator
Honda B18B Fuel Pressure Regulator
Honda F22A1 Fuel Pressure Regulator
Honda F22A4 Fuel Pressure Regulator
Honda F22A6 Fuel Pressure Regulator
Honda H22A1 Fuel Pressure Regulator
Honda H22A4 Fuel Pressure Regulator
Honda H23 Fuel Pressure Regulator
etc. 
Required: Fuel rail must have a 8AN ORB female threaded port.

Part Number: 14-0165 
Fitting Threads: 3/8" NPT male
FPR Threads: M5x0.8mm
Application: 
Nissan RB26DETT
Nissan RB25DET
Nissan RB20DET
Nissan SR20DET
Nissan KA24DE
Nissan CA18DET
Saab 9-2X Aero 2.5L
Subaru EJ20 GC8 WRX
Subaru EJ25 GR WRX
Mazda RX-7 13B-REW
etc.
Required: Fuel rail must have a 3/8" NPT female threaded port. PTFE sealing paste. Each end of the adapter fitting mimics the profile of an 11/16" (18mm) wrench for rotating during installation.

Part Number: 14-0285 
Fitting Threads: 8AN ORB male
Application: 
Toyota 1JZ-GTE Non VVT-i
Toyota 1JZ-GTE VVT-i
Toyota 3S-GTE
Toyota 1UZ-FE
Mazda RX-7 FC Series 4
etc.
Required: Fuel rail must have a 8AN ORB female threaded port.
 

Part Number: 20-0014 
Fitting Threads: 6AN ORB high pressure female ports (in/out). 6AN male male low pressure return port. 1/8" NPT female port.
Application: 
Audi 1.8L Turbo
Ford Falcon BA, BF, FG XR6 Turbo
Ford Territory Turbo
FPV F6 Typhoon Turbo
Volkswagen 1.8L Turbo
etc. 
Required: Mounts external to the fuel rail. A mounting location is required with hose and hose ends. PTFE sealing paste for 1/8" NPT port. 
 

Part Number: 20-0459
Fitting Threads: 8AN ORB male
Application: 
Nissan VQ35HR Fuel Pulse Damper
Nissan VQ37VHR Fuel Pulse Damper
Nissan VQ40DE Fuel Pulse Damper
Nissan VR38DETT Fuel Pulse Damper
etc. 
Required: Fuel rail must have a 8AN ORB female threaded port.